Feed disc and gravure rolls have to be compelled to be modified to suit the form and size of the merchandise. Feed discs are often ordered with completely different numbers and sizes of pocket and might be interchanged in five minutes. Gravure rolls also can be ordered with any imprint and these square measure matched with the pocket spacing on the feed disc. Roll dynamic needs only 1 minute.
Tablets 3.175 to 12.7mm diameter. Capsules size 00 to five upto twenty five.4 mm long.
Power provide – 230 volts single part and 440 volts three part. compressed gas demand four cfm at forty Psi
(Dependent on diameter or length of item)
|Length not exceeding||Estimated production per hour|
|5.556 mm||90,000 To 120,000|
|10.319 mm||70,000 To 95,000|
|17.463 mm||45,000 To 60,000|
|25.400 mm||35,000 To 48,000|
Operation is totally automatic. once initial set-up, operator has got to solely make full tablets or capsules and ink reservoir, once needed. It mechanically feeds, positions, meters, imprints and ejects. Operation is controlled by a switch and a pedal.
Feed discs and gravure rolls are often ordered in any size so as to get most effective production. Discs square measure obtainable in forty five pockets. The smaller the piece, the a lot of pockets are often used and therefore the higher the assembly rate. variety of pockets on the feed disc determines spacing of the imprints carven on the gravure roll-each disc needs an identical roll. However, each discs and rolls square measure moderately priced and quickly modified. One machine equipped with many feed discs and gravure rolls could be a absolutely versatile printer ready to mark nearly any pill or capsule the Manufacturerr might need to promote.
Prints on nearly any size or form, on one facet or each, in one color or 2 of either empty or crammed capsules.